A cluster must include at least 4 servers: 2 storage servers and 2 processing servers. You can use the Sizing Guide determine the right number of servers for your organization.
Deployment of the Central Node and Sensor components in the form of a cluster includes the following steps:
The first step is to deploy the storage server. After the storage server is deployed, you can add additional storage and processing servers to the cluster.
You can deploy the servers in any order.
At the final stage of cluster deployment, you need to configure the scaling settings of the application: specify the planned volume of SPAN traffic, email traffic, the number of hosts with the Endpoint Agent component, as well as the size of the Storage and event database.
The Central Node component is always installed together with the Sensor component. If you need to use the Central Node component separately, when deploying the processing server, turn off receipt of mirrored traffic from SPAN ports at step 11.
If you have a cluster deployed on physical servers and want to add more hard drives to these servers or replace some of the existing drives and then reinstall the cluster, you must purge the drives previously allocated for the OSD (Object Storage Daemon) on the storage servers before installing components. Otherwise, the application is not guaranteed to work correctly. If you want to completely disconnect the drives and no longer plan to reconnect them to the server, purging the drives is not necessary.
When deploying a cluster on virtual servers, it is strongly not recommended to use the E1000 network adapter. If you select E1000 as the network adapter, the application displays the following error: "Error processing TAA rules. Try disabling some of the user rules." We recommend using the VMXNET 3 network adapter.