Viewing network interface information

The network interface card in the Sensor servers section of the application web interface displays the following information:

• Network interface name
• MAC address of the network interface
• IP address of the network interface
• Network interface bandwidth
• Blink. This link lets you identify the Ethernet port associated with a network interface

If a monitoring point has been added to the network interface, the following information about the monitoring point is displayed in the card of the network interface:

• Monitoring point name.
• Technology mode is the state of the technology inheritance functionality. It can be Enabled or Disabled.

You can view network interface details.

To view network interface details:

1. Select the Sensor servers section in the window of the application web interface.
2. Click the card of the relevant network interface.

   This opens a window with information about the network interface.

The network interface card displays the following information:

• Network interface is the name of the network interface in the operating system.
• Connection is the icon indicating that a network cable is connected to the Ethernet port of the network interface:
  •  – the network cable is connected.
  •  – the network cable is disconnected.

    The icon blinks when the Ethernet port indication mode is enabled.

  • MAC address is the MAC address of the network interface.
  • IP address is the IP address of the network interface.

    If multiple IP addresses are found on the network interface, a maximum of 16 IP addresses are displayed in the details area.

If a monitoring point has been added to the network interface, the following information is displayed in the card of the network interface:

• Status is the current status of the monitoring point indicated by an icon and a text description:
  • OК. The monitoring point is available.
  • Switchover. The operating mode of the monitoring point is being changed.
  • Error. An error was detected when switching over the operating mode of the monitoring point.
• Connection is the icon indicating that a network cable is connected to the Ethernet port of the network interface:
  •  – the network cable is connected.
  •  – the network cable is disconnected.

  The icon blinks when the Ethernet port indication mode is enabled.

• Network interface is the name of the network interface in the operating system.
• Mode is the current mode of the monitoring point:
  • Enabled.
  • Disabled.
• On the Settings tab:
  • The Inheritance of technologies indicates whether inheritance of technologies is enabled or disabled for the server.
  • MAC address is the MAC address of the network interface.
  • IP address is the IP address of the network interface.

Page top