Disabling a network interface

You can disable a network interface on an individual CPE device or on all devices that use the CPE template.

To disable a network interface on an individual CPE device:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Click the CPE device.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the Network settings tab.

   The table of network interfaces is displayed.

4. Select the Override check box next to the network interface to ignore the applied CPE template and be able to disable the interface. This check box is cleared by default.
5. Click Disable next to the network interface.
6. In the upper part of the settings area, click Save to save the configuration of the CPE device.

To disable a network interface on all devices that use the CPE template:

1. In the menu, go to the SD-WAN → CPE templates subsection.

   A table of CPE templates is displayed.

2. Click the CPE template.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the Network settings tab.

   The table of network interfaces is displayed.

4. Click Disable next to the network interface.
5. In the upper part of the settings area, click Save to save the configuration of the CPE template.

Page top