Deleting an OSPF area

You can delete an OSPF area on an individual CPE device or on all devices that use the CPE template. Deleted areas cannot be restored.

To delete an OSPF area on an individual CPE device:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Click the CPE device.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the OSPF → OSPF Areas tab.

   A table of OSPF areas is displayed.

4. Select the Override check box to ignore the applied CPE template and make the settings in the selected tab editable. This check box is cleared by default.
5. Click Delete next to the OSPF area.
6. In the confirmation window, click Delete.

   The OSPF area is deleted and is no longer displayed in the table.

7. In the upper part of the settings area, click Save to save the configuration of the CPE device.

To delete an OSPF area on all devices that use the CPE template:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Click the CPE device.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the OSPF → OSPF Areas tab.

   A table of OSPF areas is displayed.

4. Click Delete next to the OSPF area.
5. In the confirmation window, click Delete.

   The OSPF area is deleted and is no longer displayed in the table.

6. In the upper part of the settings area, click Save to save the configuration of the CPE template.

Page top