Tags

Tags describe various parameters of the CPE device, such as model, software version, or geographical location. Tags help classify devices for various tasks. For example, you can use tags to group devices of the same model and then update the firmware on such devices.

When you create a CPE device, tags describing the model and tenant to which it belongs are automatically assigned to the device.

If necessary, you can assign tags to one or more CPE devices at the same time. Note that a device must have the Registered status for tags to be assigned to it.

Kaspersky SD-WAN does not support assigning two identical tags to the same CPE device.

Assigning tags to CPE devices

To assign a tag to an individual CPE device:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Click the CPE device.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the Tags tab.

   The tags assigned to the CPE device are displayed.

4. Enter the tag and click the assign button .
5. In the upper part of the settings area, click Save to save the configuration of the CPE device.

To assign a tag to multiple CPE devices at the same time:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Select the check boxes next to CPE devices.
3. In the upper part of the page, in the Actions drop-down box, select Add tags.
4. This opens a window; in that window, enter the tag and click the assign button .
5. Click Add.

Removing CPE device tags

To remove a tag from an individual CPE device:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Click the CPE device.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the Tags tab.

   The tags assigned to the CPE device are displayed.

4. Click the delete button next to the tag.
5. In the upper part of the settings area, click Save to save the configuration of the CPE device.

To remove a tag from multiple CPE devices at the same time:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Select the check boxes next to CPE devices.
3. In the upper part of the page, in the Actions drop-down box, select Delete tags.
4. This opens a window in which you can remove the tags:
   • Click the delete button next to the tag.
   • Enter the tag in the field and select it from the drop-down list.
5. Click Delete.