Managing network service templates

A list of network service templates is displayed on the administrator portal in the Infrastructure section, in the Catalog pane on the Templates tab.

Creating a network service template

To create a network service template:

1. In the menu, go to the Catalog section.

   The network service management page is displayed.

2. In the upper part of the page, click + Template.

   The graphical design tool for building the topology is displayed.

3. Add network service components to the topology:
   1. Drag network server components from the Catalog pane into the graphical design tool. The pane displays the following network service components:
      • Network service templates — when you add a network service template to a topology, the topology is constructed in accordance with the network service template. You can add multiple network service templates to the topology.
      • Shared network services — you must add a shared network service to the topology of network services that you want to connect to the shared network service. You can specify a brief description of the shared network service.
      • Virtual and physical network functions. The actions that you can perform on virtual and physical network functions are described in the Managing virtual network functions and Managing physical network functions sections.
   2. Drag and drop links from the Links tab into the graphical design tool. The following links are displayed on this tab:
      • P2P is the Point-to-Point transport service (P2P service). You can configure a P2P service.
      • P2M is the Point-to-Multipoint transport service (P2M service). You can configure a P2M service.
      • M2M is a Multipoint-to-Multipoint transport service (M2M service). You can configure an M2M service.

      The remaining links are relevant to network communication at the VIM level and are established between VNFs hosted by the OpenStack cloud platform:

      • OS shared is the shared network through which the shared network service connects to network services. You can configure a shared network.
      • OS vRouter is the virtual L3 router. You can configure a virtual router.
      • OS VLAN is the VLAN for transmitting tagged L2 traffic of the 802.1Q standard You can configure a VLAN.
      • OS VXLAN is a VXLAN for tunneling. You can configure a VXLAN.
      • OS flat is the flat network for transmitting untagged L2 traffic You can configure a flat network.
   3. Select the UNI tab and drag CPE device UNIs to the graphical design tool. The tab displays two components, UNI and WAN. Both components designate abstract UNIs that the tenant must replace with real UNIs when creating or editing a network service. The WAN component refers to UNIs that connect to the WAN.

      You can configure a UNI in the topology.

   The components are added to the topology and displayed in the graphical design tool.

4. Connect the network service components added to the topology to each other:
   1. Click the link to which you want to connect a network service component.
   2. Click Add leaf to connect a network service component with the leaf role to the link. If you clicked a P2M service, you can click Add root to connect a network service component with the root role to the link.
   3. Click the network service component that you want to connect to the link. If you clicked a network function or shared network service, select the port to connect the link to in the displayed window.

   The network service component is connected to the link, and a line is displayed between them in the topology. For example, the figure below shows the VLAN to which a virtual network function is connected.

   

5. If you want to assign backup UNIs:

   A backup UNI can be assigned only for UNIs which are connected to at least one link.

   1. Click the UNI for which you want to assign a backup UNI.
   2. Click Reserve.
   3. Click the UNI that you want to use as the backup.

   The UNI is designated as the backup UNI, and a dotted line is displayed between the UNI, the backup UNI, and the link to which the UNI is connected. For example, in the figure below, the WAN is the backup interface for the UNI.

   

6. If you want to remove a network service component from the topology, click the component, then click Delete.

   The network service component is removed from the topology and is no longer displayed in the graphical design tool.

7. If you want to horizontally align the topology, click Arrange.
8. If you do not want to hide the descriptions of the added network service components in the topology, clear the Description check box. This check box is selected by default.
9. In the Name field, enter the name of the network service.
10. In the upper part of the graphical design tool, click Save.

The network service template is created and displayed in the Catalog pane, on the Templates tab.

Editing a network service template

When you edit a network service template, the changes are not applied to network services that have already been created and deployed using the network service template.

To edit a network service template:

1. In the menu, go to the Catalog section.

   The network service management page is displayed.

2. In the Catalog pane, select the Templates tab.

   A list of network service templates is displayed.

3. Click the network service template that you want to edit.

   The graphical design tool for building the topology is displayed.

4. Edit the settings of the network service template. For a description of the settings, see the instructions for creating a network service template.
5. In the upper part of the graphical design tool, click Save.

The network service template is modified and updated in the Templates tab.

Deleting a network service template

Deleted network service templates cannot be restored.

To delete a network service template:

1. In the menu, go to the Catalog section.

   The network service management page is displayed.

2. In the Catalog pane, select the Templates tab.

   A list of network service templates is displayed.

3. Click the delete icon next to the network service template that you want to delete.
4. In the confirmation window, click Delete.

The network service template is deleted and is no longer displayed in the Templates tab.