Kaspersky Next XDR Expert
- Kaspersky Next XDR Expert
- Quick links
- What's new
- About Kaspersky Next XDR Expert
- Architecture of Open Single Management Platform
- OSMP Console interface
- Licensing
- About data provision
- Quick start guide
- Deployment of Kaspersky Next XDR Expert
- Hardening Guide
- Deployment schemes
- Ports used by Kaspersky Next XDR Expert
- Preparation work and deployment
- Multi-node deployment: Preparing the administrator and target hosts
- Single-node deployment: Preparing the administrator and target hosts
- Preparing the hosts for installation of the KUMA services
- Installing a database management system
- Configuring the PostgreSQL or Postgres Pro server for working with Open Single Management Platform
- Preparing the KUMA inventory file
- Multi-node deployment: Specifying the installation parameters
- Single-node deployment: Specifying the installation parameters
- Specifying the installation parameters by using the Configuration wizard
- Installing Kaspersky Next XDR Expert
- Configuring internet access for the target hosts
- Synchronizing time on machines
- Installing KUMA services
- Deployment of multiple Kubernetes clusters and Kaspersky Next XDR Expert instances
- Pre-check of infrastructure readiness for deployment
- Signing in to Kaspersky Next XDR Expert
- Kaspersky Next XDR Expert maintenance
- Upgrading Kaspersky Next XDR Expert from version 1.2 to 1.3
- Updating Kaspersky Next XDR Expert components
- Changing the Kaspersky Next XDR Expert parameters without reinstalling
- Adding and deleting nodes of the Kubernetes cluster
- Versioning the configuration file
- Uninstalling Kaspersky Next XDR Expert
- Manual uninstalling of Kaspersky Next XDR Expert components
- Reinstalling Kaspersky Next XDR Expert after a failed installation
- Reinstalling Kaspersky Next XDR Expert components
- Stopping the Kubernetes cluster nodes
- Using certificates for public Kaspersky Next XDR Expert services
- Calculation and changing of disk space for storing Administration Server data
- Rotation of secrets
- Adding hosts for installing the additional KUMA services
- Replacing a host that uses KUMA storage
- Demonstration deployment of Kaspersky Next XDR Expert
- Migration to Kaspersky Next XDR Expert
- Integration with other solutions
- Threat detection
- Working with alerts
- About alerts
- Alert data model
- Viewing the alert table
- Viewing alert details
- Assigning alerts to analysts
- Changing an alert status
- Creating alerts manually
- Linking alerts to incidents
- Unlinking alerts from incidents
- Linking events to alerts
- Unlinking events from alerts
- Working with alerts on the investigation graph
- Managing aggregation rules
- Working with incidents
- About incidents
- Incident data model
- Creating incidents
- Creating child incidents
- Viewing the incident table
- Viewing incident details
- Assigning incidents to analysts
- Changing an incident status
- Changing an incident priority
- Changing an incident type
- Merging incidents
- Investigation graph
- Segmentation rules
- Copying segmentation rules to another tenant
- Managing incident types
- Managing incident workflows
- Configuring the retention period of alerts and incidents
- Viewing asset details
- Working with alerts
- Threat hunting
- Threat response
- Response actions
- Terminating processes
- Moving devices to another administration group
- Running a malware scan
- Viewing the result of the malware scan
- Updating databases
- Moving files to quarantine
- Changing authorization status of devices
- Viewing information about KASAP users and changing learning groups
- Responding through Active Directory
- Responding through KATA/KEDR
- Responding through UserGate
- Responding through Ideco NGFW
- Responding through Ideco UTM
- Responding through Redmine
- Responding through Check Point NGFW
- Responding through Sophos Firewall
- Responding through Continent 4
- Responding through SKDPU NT
- Responding through FortiGate
- Blocking IP addresses through Kaspersky NGFW
- Viewing response history from alert or incident details
- Playbooks
- Viewing the playbooks table
- Creating playbooks
- Editing playbooks
- Customizing playbooks
- Viewing playbook properties
- Terminating playbooks
- Deleting playbooks
- Launching playbooks and response actions
- Configuring manual approval of response actions
- Approving playbooks or response actions
- Enrichment from playbook
- Viewing response history
- Predefined playbooks
- Playbook trigger
- Playbook algorithm
- Editing incidents by using playbooks
- Editing alerts by using playbooks
- Response actions
- REST API
- Managing Kaspersky Unified Monitoring and Analysis Platform
- Program architecture
- Administrator's guide
- Logging in to the KUMA Console
- KUMA services
- Services tools
- Service resource sets
- Creating a storage
- Creating a correlator
- Creating an event router
- Creating a collector
- Creating an agent
- Configuring event sources
- Configuring receipt of Auditd events
- Configuring receipt of KATA/EDR events
- Configuring Open Single Management Platform for export of events to the KUMA SIEM-system
- Configuring receiving Open Single Management Platform event from MS SQL
- Creating an account in the MS SQL database
- Configuring the SQL Server Browser service
- Creating a secret in KUMA
- Configuring a connector
- Configuring the KUMA Collector for receiving Kaspersky Security Center events from an MS SQL database
- Installing the KUMA Collector for receiving Kaspersky Security Center events from the MS SQL database
- Configuring receipt of events from Windows devices using KUMA Agent (WEC)
- Configuring audit of events from Windows devices
- Configuring centralized receipt of events from Windows devices using the Windows Event Collector service
- Granting permissions to view Windows events
- Granting permissions to log on as a service
- Configuring the KUMA Collector for receiving events from Windows devices
- Installing the KUMA Collector for receiving events from Windows devices
- Configuring forwarding of events from Windows devices to KUMA using KUMA Agent (WEC)
- Configuring receipt of events from Windows devices using KUMA Agent (WMI)
- Configuring receipt of PostgreSQL events
- Configuring receipt of IVK Kolchuga-K events
- Configuring receipt of CryptoPro NGate events
- Configuring receipt of Ideco UTM events
- Configuring receipt of KWTS events
- Configuring receipt of KLMS events
- Configuring receipt of KSMG events
- Configuring receipt of PT NAD events
- Configuring receipt of events using the MariaDB Audit Plugin
- Configuring receipt of Apache Cassandra events
- Configuring receipt of FreeIPA events
- Configuring receipt of VipNet TIAS events
- Configuring receipt of Nextcloud events
- Configuring receipt of Snort events
- Configuring receipt of Suricata events
- Configuring receipt of FreeRADIUS events
- Configuring receipt of VMware vCenter events
- Configuring receipt of zVirt events
- Configuring receipt of Zeek IDS events
- Configuring DNS server event reception using the ETW connector
- Configuring Windows event reception using Kaspersky Endpoint Security for Windows
- Configuring receipt of Codemaster Mirada events
- Configuring receipt of Postfix events
- Configuring receipt of CommuniGate Pro events
- Configuring receipt of Yandex Cloud events
- Configuring receipt of Microsoft 365 events
- Configuring receipt of the Kontinent encryption system events
- Monitoring event sources
- Managing assets
- Adding an asset category
- Configuring the table of assets
- Searching assets
- Exporting asset data
- Viewing asset details
- Adding assets
- Adding asset information in the KUMA Console
- Importing asset information from Kaspersky Security Center
- Importing asset information from MaxPatrol
- Importing asset information from KICS for Networks
- Examples of asset field comparison during import
- Settings of the kuma-ptvm-config.yaml configuration file
- Assigning a category to an asset
- Editing the parameters of assets
- Archiving assets
- Deleting assets
- Updating third-party applications and fixing vulnerabilities on Kaspersky Security Center assets
- Moving assets to a selected administration group
- Asset audit
- Custom asset fields
- Critical information infrastructure assets
- Integration with other solutions
- Integration with Kaspersky Security Center
- Kaspersky Endpoint Detection and Response integration
- Integration with Kaspersky CyberTrace
- Integration with Kaspersky Threat Intelligence Portal
- Connecting over LDAP
- Enabling and disabling LDAP integration
- Adding a tenant to the LDAP server integration list
- Creating an LDAP server connection
- Creating a copy of an LDAP server connection
- Changing an LDAP server connection
- Changing the data update frequency
- Changing the data storage period
- Starting account data update tasks
- Deleting an LDAP server connection
- Kaspersky Industrial CyberSecurity for Networks integration
- Integration with Neurodat SIEM IM
- Kaspersky Automated Security Awareness Platform
- Sending notifications to Telegram
- UserGate integration
- Integration with Kaspersky Web Traffic Security
- Integration with Kaspersky Secure Mail Gateway
- Importing asset information from RedCheck
- Configuring receipt of Sendmail events
- Managing KUMA
- Working with geographic data
- User guide
- KUMA resources
- Operations with resources
- Destinations
- Normalizers
- Aggregation rules
- Enrichment rules
- Correlation rules
- Filters
- Active lists
- Viewing the table of active lists
- Adding active list
- Viewing the settings of an active list
- Changing the settings of an active list
- Duplicating the settings of an active list
- Deleting an active list
- Viewing records in the active list
- Searching for records in the active list
- Adding a record to an active list
- Duplicating records in the active list
- Changing a record in the active list
- Deleting records from the active list
- Import data to an active list
- Exporting data from the active list
- Predefined active lists
- Dictionaries
- Response rules
- Connectors
- Viewing connector settings
- Adding a connector
- Connector settings
- Secrets
- Context tables
- Viewing the list of context tables
- Adding a context table
- Viewing context table settings
- Editing context table settings
- Duplicating context table settings
- Deleting a context table
- Viewing context table records
- Searching context table records
- Adding a context table record
- Editing a context table record
- Deleting a context table record
- Importing data into a context table
- Analytics
- KUMA resources
- Working with Open Single Management Platform
- Basic concepts
- Administration Server
- Hierarchy of Administration Servers
- Virtual Administration Server
- Web Server
- Network Agent
- Administration groups
- Managed device
- Unassigned device
- Administrator's workstation
- Management web plug-in
- Policies
- Policy profiles
- Tasks
- Task scope
- How local application settings relate to policies
- Distribution point
- Connection gateway
- Configuring Administration Server
- Configuring the Administration Server connection address
- Configuring the connection of OSMP Console to Administration Server
- Configuring internet access settings
- Certificates for work with Open Single Management Platform
- About Open Single Management Platform certificates
- Requirements for custom certificates used in Open Single Management Platform
- Reissuing the certificate for OSMP Console
- Replacing certificate for OSMP Console
- Converting a PFX certificate to the PEM format
- Scenario: Specifying the custom Administration Server certificate
- Replacing the Administration Server certificate by using the klsetsrvcert utility
- Connecting Network Agents to Administration Server by using the klmover utility
- Hierarchy of Administration Servers
- Creating a hierarchy of Administration Servers: adding a secondary Administration Server
- Viewing the list of secondary Administration Servers
- Managing virtual Administration Servers
- Configuring Administration Server connection events logging
- Setting the maximum number of events in the event repository
- Changing DBMS credentials
- Backup copying and restoration of the Administration Server data
- Deleting a hierarchy of Administration Servers
- Access to public DNS servers
- Configuring the interface
- Encrypt communication with TLS
- Backup copying and restoration of KUMA Core under Kaspersky Next XDR Expert
- Discovering networked devices
- Managing client devices
- Settings of a managed device
- Creating administration groups
- Device moving rules
- Adding devices to an administration group manually
- Moving devices or clusters to an administration group manually
- About clusters and server arrays
- Properties of a cluster or server array
- Adjustment of distribution points and connection gateways
- Standard configuration of distribution points: Single office
- Standard configuration of distribution points: Multiple small remote offices
- Calculating the number and configuration of distribution points
- Assigning distribution points automatically
- Assigning distribution points manually
- Modifying the list of distribution points for an administration group
- Enabling a push server
- About device statuses
- Configuring the switching of device statuses
- Device selections
- Device tags
- Device tags
- Creating a device tag
- Renaming a device tag
- Deleting a device tag
- Viewing devices to which a tag is assigned
- Viewing tags assigned to a device
- Tagging a device manually
- Removing an assigned tag from a device
- Viewing rules for tagging devices automatically
- Editing a rule for tagging devices automatically
- Creating a rule for tagging devices automatically
- Running rules for auto-tagging devices
- Deleting a rule for tagging devices automatically
- Data encryption and protection
- Changing the Administration Server for client devices
- Viewing and configuring the actions when devices show inactivity
- Remote access to managed devices
- Remote access from a Linux-based device with OSMP Console to a Linux-based managed device
- Remote access from a Linux-based device with OSMP Console to a Windows-based managed device
- Remote access from a Windows-based device with OSMP Console to a Linux-based managed device
- Remote access from a Windows-based device with OSMP Console to a Windows-based managed device
- Deploying Kaspersky applications
- Scenario: Kaspersky applications deployment
- Protection deployment wizard
- Step 1. Starting Protection deployment wizard
- Step 2. Selecting the installation package
- Step 3. Selecting a method for distribution of key file or activation code
- Step 4. Selecting Network Agent version
- Step 5. Selecting devices
- Step 6. Specifying the remote installation task settings
- Step 7. Restart management
- Step 8. Removing incompatible applications before installation
- Step 9. Moving devices to Managed devices
- Step 10. Selecting accounts to access devices
- Step 11. Starting installation
- Adding management plug-ins for Kaspersky applications
- Removing management web plug-ins
- Viewing the list of components integrated in Open Single Management Platform
- Viewing names, parameters, and custom actions of Kaspersky Next XDR Expert components
- Downloading and creating installation packages for Kaspersky applications
- Creating installation packages from a file
- Creating stand-alone installation packages
- Changing the limit on the size of custom installation package data
- Installing Network Agent for Linux in silent mode (with an answer file)
- Preparing a device running Astra Linux in the closed software environment mode for installation of Network Agent
- Viewing the list of stand-alone installation packages
- Distributing installation packages to secondary Administration Servers
- Preparing a Linux device and installing Network Agent on a Linux device remotely
- Installing applications using a remote installation task
- Specifying settings for remote installation on Unix devices
- Starting and stopping Kaspersky applications
- Replacing third-party security applications
- Removing applications or software updates remotely
- Preparing a device running SUSE Linux Enterprise Server 15 for installation of Network Agent
- Preparing a Windows device for remote installation
- Configuring Kaspersky applications
- Scenario: Configuring network protection
- About device-centric and user-centric security management approaches
- Policy setup and propagation: Device-centric approach
- Policy setup and propagation: User-centric approach
- Policies and policy profiles
- About policies and policy profiles
- About lock and locked settings
- Inheritance of policies and policy profiles
- Managing policies
- Viewing the list of policies
- Creating a policy
- General policy settings
- Modifying a policy
- Enabling and disabling a policy inheritance option
- Copying a policy
- Moving a policy
- Exporting a policy
- Importing a policy
- Forced synchronization
- Viewing the policy distribution status chart
- Activating a policy automatically at the Virus outbreak event
- Deleting a policy
- Managing policy profiles
- Network Agent policy settings
- Usage of Network Agent for Windows, Linux, and macOS: Comparison
- Comparison of Network Agent settings by operating systems
- Manual setup of the Kaspersky Endpoint Security policy
- Configuring Kaspersky Security Network
- Checking the list of the networks protected by Firewall
- Disabling the scan of network drives
- Excluding software details from the Administration Server memory
- Configuring access to the Kaspersky Endpoint Security for Windows interface on workstations
- Configuring the registration of policy events in the Administration Server database
- Manual setup of the group update task for Kaspersky Endpoint Security
- Kaspersky Security Network (KSN)
- Managing tasks
- About tasks
- About task scope
- Creating a task
- Starting a task manually
- Starting a task for selected devices
- Viewing the task list
- General task settings
- Exporting a task
- Importing a task
- Starting the Change tasks password wizard
- Viewing task run results stored on the Administration Server
- Manual setup of the group task for scanning a device with Kaspersky Endpoint Security
- General task settings
- Application tags
- Granting offline access to the external device blocked by Device Control
- Registering Kaspersky Industrial CyberSecurity for Networks application in OSMP Console
- Managing users and user roles
- About user accounts
- About user roles
- Configuring access rights to application features. Role-based access control
- Adding an account of an internal user
- Creating a security group
- Editing an account of an internal user
- Editing a security group
- Assigning a role to a user or a security group
- Adding user accounts to an internal security group
- Assigning a user as a device owner
- Two-step verification
- Scenario: Configuring two-step verification for all users
- About two-step verification for an account
- Enabling two-step verification for your own account
- Enabling required two-step verification for all users
- Disabling two-step verification for a user account
- Disabling required two-step verification for all users
- Excluding accounts from two-step verification
- Configuring two-step verification for your own account
- Prohibit new users from setting up two-step verification for themselves
- Generating a new secret key
- Editing the name of a security code issuer
- Changing the number of allowed password entry attempts
- Deleting a user or a security group
- Changing the password for a user account
- Creating a user role
- Editing a user role
- Editing the scope of a user role
- Deleting a user role
- Associating policy profiles with roles
- Updating Kaspersky databases and applications
- Scenario: Regular updating Kaspersky databases and applications
- About updating Kaspersky databases, software modules, and applications
- Creating the Download updates to the Administration Server repository task
- Viewing downloaded updates
- Verifying downloaded updates
- Creating the task for downloading updates to the repositories of distribution points
- Adding sources of updates for the Download updates to the Administration Server repository task
- Approving and declining software updates
- Automatic installation of updates for Kaspersky Endpoint Security for Windows
- About using diff files for updating Kaspersky databases and software modules
- Enabling the Downloading diff files feature
- Downloading updates by distribution points
- Updating Kaspersky databases and software modules on offline devices
- Remote diagnostics of client devices
- Opening the remote diagnostics window
- Enabling and disabling tracing for applications
- Downloading trace files of an application
- Deleting trace files
- Downloading application settings
- Downloading system information from a client device
- Downloading event logs
- Starting, stopping, restarting the application
- Running the remote diagnostics of Kaspersky Security Center Network Agent and downloading the results
- Running an application on a client device
- Generating a dump file for an application
- Running remote diagnostics on a Linux-based client device
- Managing third-party applications and executable files on client devices
- Using Application Control to manage executable files
- Application Control modes and categories
- Obtaining and viewing a list of applications installed on client devices
- Obtaining and viewing a list of executable files stored on client devices
- Creating an application category with content added manually
- Creating an application category that includes executable files from selected devices
- Creating an application category that includes executable files from selected folder
- Viewing the list of application categories
- Configuring Application Control in the Kaspersky Endpoint Security for Windows policy
- Adding event-related executable files to the application category
- Creating the Install required updates and fix vulnerabilities task
- Find vulnerabilities and required updates task settings
- About the license
- API Reference Guide
- Basic concepts
- Monitoring, reporting, and audit
- Scenario: Monitoring and reporting
- About types of monitoring and reporting
- Triggering of rules in Smart Training mode
- Dashboard and widgets
- Reports
- Events and event selections
- About events in Open Single Management Platform
- Events of Open Single Management Platform components
- Using event selections
- Creating an event selection
- Editing an event selection
- Viewing a list of an event selection
- Exporting an event selection
- Importing an event selection
- Viewing details of an event
- Exporting events to a file
- Viewing an object history from an event
- Deleting events
- Deleting event selections
- Setting the storage term for an event
- Blocking frequent events
- Event processing and storage on the Administration Server
- Notifications and device statuses
- Kaspersky announcements
- Cloud Discovery
- Exporting events to SIEM systems
- Configuring event export to SIEM systems
- Before you begin
- About event export
- About configuring event export in a SIEM system
- Marking of events for export to SIEM systems in Syslog format
- About exporting events using Syslog format
- Configuring Open Single Management Platform for export of events to a SIEM system
- Exporting events directly from the database
- Viewing export results
- Managing object revisions
- Deletion of objects
- Downloading and deleting files from Quarantine and Backup
- Operation diagnostics of the Kaspersky Next XDR Expert components
- Multitenancy
- Contact Technical Support
- Known issues
- Appendices
- Commands for components manual starting and installing
- Integrity check of KUMA files
- Normalized event data model
- Configuring the data model of a normalized event from KATA EDR
- Asset data model
- User account data model
- KUMA audit events
- Event fields with general information
- User successfully signed in or failed to sign in
- User successfully logged out
- Service was successfully created
- Service was successfully deleted
- Service was successfully started
- Service was successfully paired
- Service was successfully reloaded
- Service was successfully restarted
- Storage partition was deleted automatically due to expiration
- Storage partition was deleted by user
- Active list was successfully cleared or operation failed
- Active list item was successfully changed, or operation was unsuccessful
- Active list item was successfully deleted or operation was unsuccessful
- Active list was successfully imported or operation failed
- Active list was exported successfully
- Resource was successfully added
- Resource was successfully deleted
- Resource was successfully updated
- Asset was successfully created
- Asset was successfully deleted
- Asset category was successfully added
- Asset category was deleted successfully
- Settings were updated successfully
- The dictionary was successfully updated on the service or operation was unsuccessful
- Response in Active Directory
- Response via KICS for Networks
- Kaspersky Automated Security Awareness Platform response
- KEDR response
- Correlation rules
- Time format
- Mapping fields of predefined normalizers
- Glossary
- Administrator host
- Agent
- Alert
- Asset
- Bootstrap
- Collector
- Configuration file
- Context
- Correlation rule
- Correlator
- Custom actions
- Distribution package
- Event
- Incident
- Investigation graph
- Kaspersky Deployment Toolkit
- Kubernetes cluster
- KUMA inventory file
- KUMA services
- Multitenancy
- Network Agent
- Network Location Awareness (NLA)
- Node
- Normalized event
- Observables
- Playbook
- Playbook algorithm
- Registry
- Response actions
- Segmentation rules
- Storage
- Target hosts
- Tenant
- Threat development chain
- Transport archive
- Information about third-party code
- Trademark notices
Creating the Install required updates and fix vulnerabilities task
The Install required updates and fix vulnerabilities task is only available under the Vulnerability and patch management license.
The Install required updates and fix vulnerabilities task is used to update and fix vulnerabilities in the third-party software installed on managed devices. This task allows you to install multiple updates and fix multiple vulnerabilities according to the rules, which you specify in the task settings.
To install updates or fix vulnerabilities by using the Install required updates and fix vulnerabilities task, you can do one of the following:
- Run the Update installation wizard or the Vulnerability fix wizard.
- Create an Install required updates and fix vulnerabilities task.
- Add a rule for update installation to an existing Install required updates and fix vulnerabilities task.
To create the Install required updates and fix vulnerabilities task:
- In the main menu, go to Assets (Devices) → Tasks.
- Click Add.
The New task wizard starts. Proceed through the wizard by using the Next button.
- In the Application drop-down list, select Open Single Management Platform.
- In the Task type list, select the Install required updates and fix vulnerabilities task type.
If the task is not displayed, make sure that your account has the Read, Write, and Execute rights for the System management: Vulnerability and patch management functional area. You cannot create and configure the Install required updates and fix vulnerabilities task without these access rights.
- In the Task name field, specify the name of the new task.
The task name cannot be more than 100 characters long and cannot include any special characters ("*<>?\:|).
- Select the devices to which the task will be assigned.
- At the Specify rules for installing updatesstep of the wizard, add rules for update installation.
These rules are applied to installation of updates on client devices. If rules are not specified, the task has nothing to perform. For information about operations with rules, refer to Rules for update installation.
These rules are applied to the installation of updates on client devices. If you do not specify any rules, the task has nothing to perform.
- Specify the following settings:
- Start installation at device restart or shutdown
If this option is enabled, updates are installed when the device is restarted or shut down. Otherwise, updates are installed according to a schedule.
Use this option if installing the updates might affect the device performance.
By default, this option is disabled.
- Install the required general system components
If this option is enabled, before installing an update the application automatically installs all general system components (prerequisites) that are required to install the update. For example, these prerequisites can be operating system updates.
If this option is disabled, you may have to install the prerequisites manually.
By default, this option is disabled.
- Allow installation of new application versions during updates
If this option is enabled, updates are allowed when they result in installation of a new version of a software application.
If this option is disabled, the software is not upgraded. You can then install new versions of the software manually or through another task. For example, you may use this option if your company infrastructure is not supported by a new software version or if you want to check an upgrade in a test infrastructure.
By default, this option is enabled.
Upgrading an application may cause malfunction of dependent applications installed on client devices.
- Download updates to the device without installing them
If this option is enabled, the application downloads updates to the device but does not install them automatically. You can then Install downloaded updates manually.
Microsoft updates are downloaded to the system Windows storage. Updates of third-party applications (applications made by software vendors other than Kaspersky and Microsoft) are downloaded to the folder specified in the Download updates to field.
If this option is disabled, the updates are installed to the device automatically.
By default, this option is disabled.
- Download updates to
This folder is used to download updates of third-party applications (applications made by software vendors other than Kaspersky and Microsoft).
- Download updates to
- Enable advanced diagnostics
If this feature is enabled, Network Agent writes traces even if tracing is disabled for Network Agent in Open Single Management Platform Remote Diagnostics Utility. Traces are written to two files in turn; the total size of both files is determined by the Maximum size, in MB, of advanced diagnostics files value. When both files are full, Network Agent starts writing to them again. The files with traces are stored in the %WINDIR%\Temp folder. These files are accessible in the remote diagnostics utility, you can download or delete them there.
If this feature is disabled, Network Agent writes traces according to the settings in Open Single Management Platform Remote Diagnostics Utility. No additional traces are written.
When creating a task, you do not have to enable advanced diagnostics. You may want to use this feature later if, for example, a task run fails on some of the devices and you want to get additional information during another task run.
By default, this option is disabled.
- Maximum size, in MB, of advanced diagnostics files
The default value is 100 MB, and available values are between 1 MB and 2048 MB. You may be asked to change the default value by Kaspersky Technical Support specialists when information in the advanced diagnostics files sent by you is not enough to troubleshoot the problem.
- Maximum size, in MB, of advanced diagnostics files
Go to the next step of the wizard.
- Start installation at device restart or shutdown
- Specify the operating system restart settings:
- Do not restart the device
Client devices are not restarted automatically after the operation. To complete the operation, you must restart a device (for example, manually or through a device management task). Information about the required restart is saved in the task results and in the device status. This option is suitable for tasks on servers and other devices where continuous operation is critical.
- Restart the device
Client devices are always restarted automatically if a restart is required for completion of the operation. This option is useful for tasks on devices that provide for regular pauses in their operation (shutdown or restart).
- Prompt user for action
The restart reminder is displayed on the screen of the client device, prompting the user to restart it manually. Some advanced settings can be defined for this option: text of the message for the user, the message display frequency, and the time interval after which a restart will be forced (without the user's confirmation). This option is most suitable for workstations where users must be able to select the most convenient time for a restart.
By default, this option is selected.
- Repeat prompt every (min)
If this option is enabled, the application prompts the user to restart the operating system with the specified frequency.
By default, this option is enabled. The default interval is 5 minutes. Available values are between 1 and 1440 minutes.
If this option is disabled, the prompt is displayed only once.
- Restart after (min)
After prompting the user, the application forces restart of the operating system upon expiration of the specified time interval.
By default, this option is enabled. The default delay is 30 minutes. Available values are between 1 and 1440 minutes.
- Wait time before forced closure of applications in blocked sessions (min)
Applications are forced to close when the user's device goes locked (automatically after a specified interval of inactivity, or manually).
If this option is enabled, applications are forced to close on the locked device upon expiration of the time interval specified in the entry field.
If this option is disabled, applications do not close on the locked device.
By default, this option is disabled.
- Do not restart the device
- At the Finish task creation step of the wizard, enable the Open task details when creation is complete option to modify the default task settings.
If you do not enable this option, the task will be created with the default settings. You can modify the default settings later.
- Click the Finish button.
The New task wizard creates the task. If you enabled the Open task details when creation is complete option, the task properties window automatically opens. In this window, you can specify the general task settings and, if required, change the settings specified during task creation.
You can also open the task properties window by clicking the name of the created task in the list of tasks.
The task is created, configured, and displayed in the list of tasks.
- To run the task, select it in the task list, and then click the Start button.
You can also set a task start schedule on the Schedule tab of the task properties window.
For a detailed description of scheduled start settings, refer to the general task settings.
After the task is completed, the required updates are installed and the vulnerabilities are fixed.