Kaspersky Unified Monitoring and Analysis Platform

Modifying the self-signed web console certificate

You can use your company's certificate and key instead of the self-signed certificate of the web console. For example, if you want to replace the self-signed CA certificate of the Core with a certificate issued by your corporate CA, you must provide an external.cert and an unencrypted external.key in PEM format.

The following example shows how to replace a self-signed CA certificate of the Core with your corporate certificate in PFX format. You can use instructions in this section as an example and adapt the steps according to your needs.

To replace the certificate of the KUMA web console with an external certificate:

1. If you are using a certificate and key in a PFX container, use OpenSSL to convert the PFX file to a certificate and encrypted key in PEM format:

   openssl pkcs12 -in kumaWebIssuedByCorporateCA.pfx -nokeys -out external.cert

   openssl pkcs12 -in kumaWebIssuedByCorporateCA.pfx -nocerts -nodes -out external.key

   Enter the password of the PFX key when prompted (Enter Import Password).

   The command creates the external.cert certificate and the external.key key in PEM format.

2. In the KUMA web interface, go to the Settings → Common → Core settings section under External TLS pair, click Upload certificate and Upload key and upload the external.cert file and the unencrypted external.key file in PEM format.
3. Restart KUMA:

   systemctl restart kuma-core

4. Refresh the web page or restart the browser that you are using to manage the KUMA web interface.

Your company certificate and key are replaced.