Configuring settings of the network interface

If you are using the distributed solution and multitenancy mode, use the web interface of the PCN or SCN server for which you want to configure parameters.

To configure the network interface:

  1. In the window of the program web interface, select the Settings section, Network settings subsection.
  2. Select the network interface whose settings you want to configure.

    This opens the Edit network interface window.

  3. In the State settings group, select one of the following options:
    • Disabled.
    • Enabled, using DHCP server if you want the settings received from the DHCP server to be used for the network interface.
    • Enabled, manual configuration if you want the manually configured network interface to be used.
  4. If you selected Enabled, manual configuration, specify values for the following parameters:
    1. In the IP field, specify the IP address of the network interface.
    2. In the Subnet mask field, specify the subnet mask of the network interface.
    3. In the Gateway text box, enter the IP address of the gateway.
  5. Click Save.

The settings of the network interface will be configured.

Page top